|
|
Project History
Summation of Honolulu International Airport
South Ramp Development, Contract Work
General Contractor: Sheet Metal & Structural Steel Contractor specializing in Pre-engineered Metal Buildings
2008-Present Mokulele Air
150 Kaulele Place
Honolulu, Hawaii 96819
- Airport Hangar Facility: 15,000 sq ft
2007-2008 Makani Kai
130 Iolana Place
Honolulu, Hawaii 96819
Phone: (808) 834-5813 Fax: (808) 837-7867
email:info@makanikai.com
- Airport Hangar Facility: 8,000 sq ft
2006-2007 Dorvin D. Leis
146 Palekona Place
Honolulu, Hawaii 96819
- Airport Hangar Facility: 27,000 sq ft
2006-2007 Pacific Air cargo
Pacific Air Cargo - HONOLULU
111 Keehi Place
Honolulu, Hawaii 96819
Phone: (808) 834-7977 Fax: (808) 834-7987
- Airport Hangar Facility: 48,500 sq ft
2006-Washin Air Honolulu
Honolulu Int'l Airport
112 Nakolo Place,112 Nakolo Place
Honolulu, HI 96819
Phone: (808) 836-3539 Fax: (808) 839-3464
- Airport Hangar Facility: 13,000 sq ft
1985-Present KALITTA AIR
818 Willow Run Airport, Ypsilanti, MI 48198
Workers Supervised: 100+ to include sub-contractors
Amount of supervisory Experience: 23 yrs.
- Airport Hangar Facility: 80,000 sq ft
- Avionics Shop w/subsequent Hazardous Material Bldg: 75,000 sq. ft.
- Airport Hangar Facility: 85,000 sq ft.
- (2) Boeing 747 Simulator Bldgs.: 140,000 sq ft.
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other Sheetmetal Workers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, and material requirements for job accomplishment. Transmit direction to Sheetmetal Workers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required. |
| Other Hawaiian Projects
2007-Present Pacific Air Cargo, 111 Ke‘ehi Place, Honolulu, Hawai‘i 96819
Workers Supervised: 75+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
- Airport Hangar Facility: 80,000 sq. ft.
2007-2008 Wash-in Air, 112 Nakolo Place, Honolulu, Hawai‘i 96819
Workers Supervised: 50+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
- Airport Hangar Facility
2007-Present Dorvin D. Leis, 146 Palekona Place, Honolulu, Hawai‘i 96819
Workers Supervised: 50+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
- Airport Hangar Facility
2007-Present Makani Kai Helicopter, 130 Iolana Place, Honolulu, Hawai‘i 96819
Workers Supervised: 75+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
Airport Hangar Facility
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other Sheetmetal Workers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, and material requirements for job accomplishment. Transmit direction to Sheetmetal Workers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
|
| Michigan Projects
1985-Present KALITTA AIR
818 Willow Run Airport, Ypsilanti, MI 48198
Workers Supervised: 100+ to include sub-contractors
Amount of supervisory Experience: 23 yrs.
Airport Hangar Facility: 80,000 sq ft
- Gross Contract Amount: $1.6 mil.
Avionics Shop w/subsequent Hazardous Material Bldg: 75,000 sq. ft
- Gross Contract Amount: $1.2 mil.
Airport Hangar Facility: 85,000 sq ft.
- Gross Contract Amount: $1.8 mil.
(2) Boeing 747 Simulator Bldgs.: 140,000 sq ft.
- Gross Contract Amount: $7.9 mil.
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other Sheetmetal Workers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, and material requirements for job accomplishment. Transmit direction to Sheetmetal Workers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
|
| 2003-Present Kalitta Motor Sports
1010 James L Hart Pkwy, Ypsilanti, MI 48198
Workers Supervised: 50+ to include sub-contractors
Amount of supervisory Experience: 5 yrs.
- Race Car Shop: 59,000 sq. ft.
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
- Supervised and performed all finish carpentry and sub-contractor performance to guarantee a quality turn-key building.
- Maintained all responsibilities of a General Contractor in overseeing project completion in entirety.
Supervised and coordinated activities of other Sheetmetal Workers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, and material requirements for job accomplishment. Transmit direction to Sheetmetal Workers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
1988-1990 McIntosh & McKayDealership, Tawas, Mi 48763
Workers Supervised: 50+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
- Car Dealership
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other Sheetmetal Workers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, and material requirements for job accomplishment. Transmit direction to Sheetmetal Workers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
1990-1991 M & Q Chevrolet,Mt. Pleasant, MI 48804
Workers Supervised: 50+ to include sub-contractors
Amount of supervisory Experience: 1 yrs.
- Car Dealership
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other Sheetmetal Workers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, and material requirements for job accomplishment. Transmit direction to Sheetmetal Workers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
1991-1992 Scheer Motors, Grayling, MI 49738
Workers Supervised: 50+ to include sub-contractors
Amount of supervisory Experience: 1 yrs.
- Car Dealership
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other Sheetmetal Workers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, and material requirements for job accomplishment. Transmit direction to Sheetmetal Workers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
1991-1993 TeriMeisner Ford, Grayling, MI 49738
Teri Mesiner Ford, Houghton Lake,MI 48629
Workers Supervised: 125+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
- Car Dealership
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other SheetmetalWorkers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, andmaterial requirements for job accomplishment. Transmit direction to SheetmetalWorkers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
1993-1994 Crapo Ford, Grayling, MI 49738
Workers Supervised: 75+ to include sub-contractors
Amount of supervisory Experience: 1 yrs.
- Car Dealership
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other SheetmetalWorkers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, andmaterial requirements for job accomplishment. Transmit direction to SheetmetalWorkers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
1993-1994 M& Q Chevrolet, Alma,MI 48801
Workers Supervised: 50+ to include sub-contractors
Amount of supervisory Experience: 1 yrs.
-Car Dealership
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other SheetmetalWorkers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, andmaterial requirements for job accomplishment. Transmit direction to SheetmetalWorkers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
1995-1997 Mobort Industries, Mt. Pleasant,MI 48804
Workers Supervised: 50+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
- Factory:150,000 sq. ft.
1995-1997 Taylor Door, West Branch, MI 48661
Workers Supervised: 100+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
- Factory: 300,000 sq. ft.
1997-1999 SealyMattress, Taylor, MI 48180
Workers Supervised: 75+ to include sub-contractors
Amount of supervisory Experience: 2 yrs.
- Factory: 80,000 sq. ft.
1998-2001 Sand Products, Moran,MI 49760
Workers Supervised: 175+ to include sub-contractors
Amount of supervisory Experience: 3 yrs.
- Factory: 825,000 sq. ft.
1986-2001 Valenite Gaging Systems, 21101 Fern St, Oak Park, MI 48237
Workers Supervised: 100+ to include sub-contractors
Amount of supervisory Experience: 18 yrs.
(17) Factory(s): 200,000 sq. ft.
1986-2001 Star Cutter Co.
23461 Industrial Park Drive, P.O. Box 376 - Farmington Hills, MI 48335
Workers Supervised: 100+ to include sub-contractors
Amount of supervisory Experience: 18 yrs.
- (11) Factory(s): 100,000 sq. ft.
- Read engineering and architectural drawings, sketches and work specifications to be performed, and lay out, measure and mark sheet metal according to drawings or templates
- Operate metalworking machines such as shears, brakes, punches, and drill presses, including computer numerical control equipment to cut, bend, punch, drill, shape or straighten sheet metal
- Install and use rigging and hoisting equipment
- Fit and join sheet metal parts using riveting, welding, soldering and similar equipment to fabricate products such as ventilation shafts, exhaust hoods, eavestroughs, partition frames, air and heat ducts, material handling systems, roof decking and sheet metal buildings
- Install sheet metal products according to specifications and building codes
- Grind and buff seams, joints and rough surfaces
- Inspect product quality and installation to ensure conformance to specifications.
Supervised and coordinated activities of other SheetmetalWorkers engaged in the fabrication and maintenance of sheetmetal systems. Develop solutions to a variety of problems of moderate complexity. Perform assigned systems tasks/efforts to include directed work schemes under direction. Responsible for work accomplishment in accordance with published schedules. Determine parts, supplies, andmaterial requirements for job accomplishment. Transmit direction to SheetmetalWorkers. Conduct on the job training of personnel required as well as provide guidance to less experienced personnel. Frequent internal work center and limited external contacts. Coordinates work within the work center or shop. Input Operations & Maintenance data. Work was performed in both a shop setting and outside on various types of job/construction sites. Perform other duties as required.
|
|
|
